If you’re a homeowner in Dallas-Fort Worth, you already know what the Texas sun, spring pollen, and summer storms do to your driveway, siding, and patio. Pressure washing is one of the fastest ways to restore your home’s curb appeal — but before you book a service, you probably want to know what it’ll cost.
Here’s a straightforward breakdown of pressure washing prices across the DFW metroplex in 2026, based on common residential jobs.
Average Pressure Washing Costs in DFW
Prices vary by surface type, square footage, and the level of buildup. Here are the typical ranges you’ll see from professional pressure washing companies in the Dallas-Fort Worth area:
Driveway: $100–$250 for a standard 2-car driveway (400-600 sq ft). Heavily stained concrete or longer driveways run $200-$350.
House exterior / siding: $200–$500 for a typical single-story home. Two-story homes run $350–$700 due to additional height and equipment requirements. Most companies use soft washing (lower pressure + cleaning solution) on siding to avoid damage.
Patio or deck: $100–$300 depending on size and material. Wood decks usually cost more because they require lower pressure settings and sometimes a post-wash sealant.
Fence: $150–$350 for a standard wood privacy fence (150-200 linear feet). Cedar fences common in Southlake and Frisco neighborhoods may need gentler treatment.
Sidewalks and walkways: $50–$150, often bundled at a discount with driveway cleaning.
Full property package: $400–$900 for a combination of driveway, sidewalks, patio, and house wash. Bundling typically saves 15-20% compared to booking each surface separately.
What Affects the Price?
Not every job is the same, and several factors can push your quote higher or lower:
Square footage is the biggest driver. Most companies price by the square foot for large surfaces ($0.15–$0.40/sq ft for flatwork, $0.20–$0.50/sq ft for vertical surfaces).
Level of staining. A driveway with light dust washes faster than one with years of oil stains, mildew, or rust. Heavy staining may require pre-treatment chemicals or multiple passes.
Accessibility. Second-story walls, gated backyards, or surfaces that require moving furniture or vehicles add time and cost.
Surface material. Concrete is straightforward. Brick, stone, stucco, and wood each require different pressure levels and techniques, which can affect pricing.
Water source. Most pros bring their own water tank, but some need access to your hose spigot. If your water pressure is low, they may need to bring supplemental water.
Pressure Washing vs. Soft Washing: What’s the Difference?
You’ll see both terms when getting quotes. Here’s the distinction:
Pressure washing uses high-pressure water (2,000-4,000 PSI) to blast dirt and grime off hard surfaces like concrete, brick, and stone. Great for driveways and sidewalks.
Soft washing uses low pressure (under 1,000 PSI) combined with specialized cleaning solutions to kill mold, mildew, algae, and bacteria. This is the preferred method for vinyl siding, stucco, roof shingles, and wood — surfaces that high pressure could damage.
A good pressure washing company in DFW will use the right technique for each surface without you having to ask. If a company wants to blast your vinyl siding at full pressure, that’s a red flag.
How Often Should You Pressure Wash in North Texas?
The DFW climate creates a perfect storm for exterior grime. Spring brings pollen, summer brings dust and heat, and our humid stretches encourage mold and mildew growth. Most homes benefit from pressure washing once a year, typically in spring or early fall.
Driveways and high-traffic walkways may need attention every 6-12 months, especially if you park vehicles that leak oil or if trees overhang the concrete.
Is It Worth Hiring a Professional?
You can rent a pressure washer from Home Depot for about $50-100/day. But there are good reasons most homeowners hire a pro:
First, damage risk. Too much pressure on the wrong surface can etch concrete, strip paint, gouge wood, or force water behind siding. Professionals know the right PSI, nozzle, and distance for each material.
Second, time. A professional crew can wash an entire property in 2-3 hours. A DIY job with a rented machine typically takes a full day or weekend.
Third, results. Commercial equipment delivers 3-4x the water flow of consumer models, which means dramatically better cleaning with fewer passes.
For a one-time annual wash, hiring a pro is usually the smarter play — the cost difference between renting and hiring is often less than $100, and the results are noticeably better.
Find Pressure Washing Pros in Your DFW Neighborhood
Ready to get quotes? We’ve compiled vetted pressure washing professionals across the Dallas-Fort Worth area:
- Pressure Washing in Plano
- Pressure Washing in Richardson
- Pressure Washing in Frisco
- Pressure Washing in Southlake
Each listing includes pricing details, service areas, and contact information so you can compare options and book with confidence.